Wall drying device – geomagnetic polarity inverter against moisture in walls IPG white

Wall drying device – geomagnetic polarity inverter against moisture in walls IPG white.

Anti-humidity solution with geomagnetic inverter IPG GEOSTOP.

Drying out walls is part of humidity treatments, and the IPG GEOSTOP geomagnetic polarity inverter is an innovative and effective solution to this problem. Rising damp is a physical phenomenon where moisture from the ground ascends into walls, affecting all porous materials in contact with the earth. To stop this phenomenon, the cause must be eliminated, and the IPG GEOSTOP presents itself as the optimal solution.

Please refer to the installation instructions

Geomagnetic polarity inverter against moisture IPG GEOSTOP.

Guaranteed Made in France product.

Install it yourself! Quick and easy installation | Instruction sheet included in the package.

Geomagnetic Wall Drying: An Innovative and Effective Solution against Humidity

Product Benefits:

• Does not emit any electromagnetic waves.
• Operates autonomously, without electrical connections or batteries.
• Radical and definitive solution: addresses wall moisture problems at their source.
• Very easy to install and cost-effective.
• Can treat the entire building (walls, pillars, floors, basement, etc.).
• Available in multiple models with an effective radius of up to 60 meters.
• Reduces heating costs since walls are less damp.
• 10-year manufacturer’s warranty.
• Made in France.
• Simple cylindrical casing for easy installation (no construction or assistance required).
• Rising damp is eliminated between 18 and 24 months (depending on building specifics and following recommendations*).
• Suitable for all types of buildings affected by moisture: houses, basements, garages, churches, cathedrals.

What is the purpose of our geomagnetic polarity inverter IPG GEOSTOP?

Signs of a moisture problem include: warped flooring, blistering walls, peeling wallpaper, loose baseboards, and mold stains on walls and ceilings… Fortunately, there are radical solutions to address moisture problems at their source. Our geomagnetic polarity inverter, GEOSTOP, is the solution to combat moisture in your home, especially rising damp. Rising damp manifests as dark stains at the base of walls: it’s moisture rising up the walls, leading to mold and dark stains. Damage can be significant to floors, ceilings, walls, and even to health. If moisture is rising in your walls, it means that water is rubbing against the materials of your floor, which charges it with electricity. It’s precisely this electrical charge that gives it the strength to rise within walls and floors, resulting in rising damp.

How does our geomagnetic polarity inverter IPG GEOSTOP work?

Our geomagnetic polarity inverter, GEOSTOP, captures the electromagnetic fields of water and sends a counter-field to stop water from rising. Subsequently, moisture gradually evaporates, and the walls eventually become completely dry. The undeniable advantage of our geomagnetic polarity inverter, GEOSTOP, is that it doesn’t require electrical connections or batteries to operate, as it’s equipped with passive circuits. Thus, it utilizes the energy of electromagnetic fields and simply needs to be placed near the area to be treated.

Installation, advice & recommendations: See the installation instructions.

Technical Specifications and Recommendations:

INSTALLATION OF THE GEOMAGNETIC POLARITY REVERSAL PROCESS IPG GEOSTOP:

The device must be installed at a minimum distance of 1.50 m from any electrical source (except electrical outlets).
It should be positioned at a height between 1.50 m and 2.00 m from the floor.
The device must be fixed to the wall using adhesive or double-sided tape and should not be moved after installation.
It must be oriented to the north using a compass or a compass app on a phone.
The device can be installed on any wall of the house, provided its dimensions and the diagonal of the building are considered to ensure that the effectiveness diameter of the IPG GEOSTOP covers the entire structure.

REMOVAL OF FILM-FORMING COATINGS OR PLASTERS:

It is recommended to remove the lower part of the walls during the drying period, approximately 10 cm above the degraded area, to allow the walls to “breathe.”

VENTILATION OF THE PREMISES:

Good air circulation is necessary to promote wall drying through evaporation. Therefore, it is essential to:
Install adequate ventilation in the premises.
Ensure that doors and windows meet standards, especially with doors trimmed by at least 1.5 cm in dry rooms and 2 cm in humid rooms.
Install window vents to improve ventilation.

RESTORATION OF PLASTER AND PAINTING:

When the walls have dried, hygroscopic salts, which attract moisture, rise to the surface. It is essential to brush the walls to remove most of these salts. To ensure optimal drying and prevent further salt rise in the plasters, it is recommended to:
Renovate the plaster with a lime plaster enriched with a specific additive against hygroscopic salts.

INSTALLATION OF A DRAIN:

In the event of lateral infiltration, it is highly recommended to set up a drainage system around the house to collect and divert groundwater before it reaches the foundations.

IMPORTANT INFORMATION:

Several factors influence the drying speed of walls, including their thickness, composition, coating, and strict adherence to our recommendations. This process does not treat water infiltration, flooding, or mold, which must be handled separately.