ATE MAX Light Grey – Electromagnetic Polarity Inverter Against Wall Dampness

ATE MAX Light Grey – Electromagnetic Anti-Damp Device for Wall Drying

Premium solution against wall damp and rising damp

The ATE MAX Light Grey is a high-range electromagnetic device designed to effectively dry damp walls, even in large buildings, old houses, or areas highly exposed to humidity. Thanks to its polarity inversion technology, it acts directly at the source, without chemical injection.

This model covers a 30-meter radius (60 meters in diameter) and offers a long-lasting solution against rising damp.

🔄 How it works

Damp walls naturally generate an electric potential difference, which encourages water to rise from the ground. The ATE MAX emits a very low-frequency electromagnetic field that reverses the polarity of water molecules present in porous materials (brick, stone, etc.). This inversion forces the moisture to flow back down by gravity to the foundations.

This process is silent, constant, and non-intrusive.

✅ Advantages of the ATE MAX Light Grey

• Effective range: 30 meters radius (60 meters diameter)

• Operates silently, without vibration, no maintenance required

• Ultra-low power consumption: 0.75 W (~€15/year)

• No damage to the building – suitable for old or fragile walls

• Passive technology, no chemicals

• Made in France – 10-year warranty

• Fast and free delivery

• Certified according to European standards (EMF, RoHS, EMC)

📘 ATE MAX User Manuals

• French – Download manual

• Declaration of Conformity – Download document

📐 Technical Specifications

• Dimensions: 322 x 232 x 32 mm

• Power supply: 12 V

• Power consumption: 0.75 W

• Coverage area: 60 meters diameter

• Installation: easy wall mounting (on load-bearing, preferably damp walls only)

📑 Certifications

• Low Voltage Directive 2014/35/EU

• EMC Directive 2014/30/EU

• RoHS Directive 2011/65/EU

• WEEE Directive 2012/19/EU

• EMF Certification – non-harmful waves (tested by Emitech)

📊 Expected Results

Results are typically visible within 18 to 24 months, depending on the building’s condition, wall composition, and adherence to installation guidelines.

🛠️ Installation Recommendations

• Installation height: 30 cm to 1 m from the floor

• Minimum distance: 1.50 m from any electronic device

• Mandatory support: load-bearing or structural damp wall (never on plasterboard)

• Mounting: like a picture – do not move after installation

• Must remain plugged in permanently (very low energy use)

💡 For optimal results:

1. Remove film-forming coatings
   Strip 10 to 20 cm above the damp area to allow the wall to breathe.

2. Ensure proper ventilation
   Install or check for a ventilation system, window vents, and undercut doors (1.5 to 2 cm).

3. Restore the walls after drying
   Remove surface salts, then reapply breathable coatings with anti-salt additives (lime recommended).

4. Install drainage if needed
   In case of lateral water infiltration, drainage helps direct water away before it reaches the foundations.

❗ Important

This device is designed to treat rising damp. It cannot eliminate:

• Active water infiltration

• Flood damage

• Visible mold

These problems require separate complementary treatments.