ATE LC15 Light Grey – Electromagnetic Polarity Inverter Against Wall Dampness

🧱 ATE LC15 Light Grey – Electromagnetic Anti-Damp Device for Wall Drying

💧 Electronic Wall Drying: An Innovative and Effective Solution Against Damp

Moisture in walls is often caused by a natural phenomenon known as rising damp, where water from the ground travels upward through porous materials such as brick, stone, or mortar. This issue affects all types of buildings, especially those built without a capillary break.

The ATE LC15 is an electromagnetic anti-damp device designed to permanently dry damp walls. This polarity-reversing unit tackles the problem directly at its source, without the use of chemicals.

⚙️ How Does the ATE LC15 Work?

Damp walls generate a natural electric potential difference, encouraging water to rise. The ATE LC15 neutralizes this effect by emitting a very low-frequency electromagnetic field, altering the alignment of water molecules.

Moisture is pushed back toward the ground and evaporates naturally, without damaging the wall.

✅ Benefits of the ATE LC15 Light Grey Model

• Progressive and long-lasting wall drying

• Coverage radius: 7.5 m (15 m diameter)

• Silent operation, no vibration, no maintenance

• Ultra-low power consumption: only 0.75 W (~€15/year)

• Certified safety: harmless to people, animals, and plants

• Made in France – 10-year manufacturer warranty

• Fast and free delivery

📘 User Manuals

• [Download the manual]

• Declaration of conformity – [Download the declaration]

📐 Technical Specifications

• Dimensions: 322 x 232 x 32 mm

• Power supply: 12 V

• Consumption: 0.75 W

• Coverage: 7.5 m radius (15 m diameter)

Certifications:

• Low Voltage Directive 2014/35/EU

• EMC Directive 2014/30/EU

• RoHS Directive 2011/65/EU

• WEEE Directive 2012/19/EU

• Certified non-harmful electromagnetic waves (Emitech lab test)

🛠️ Installation Recommendations

• Ideal placement: 30 cm to 1 m above the floor on a damp load-bearing wall (never on plasterboard or paneling)

• Minimum distance: at least 1.5 m from any electrical device

• Mounting: wall-mounted like a picture frame, with continuous power connection

• Coverage: make sure the 15 m diameter zone matches the size of the room or affected area

🌬️ Tips for Optimal Drying Results

• Remove film-forming coatings (impermeable paints or renders) 10–20 cm above damaged zones

• Ventilate the space: install appropriate ventilation, ensure door undercuts are sufficient

• After drying: brush off hygroscopic salts, then replaster with lime-based render and salt-inhibitor additive

• Drainage: consider installing perimeter drainage if lateral water infiltration is present

⏳ Expected Results

By following these guidelines, full wall drying typically occurs within 18 to 24 months, depending on the structure and condition of the building, and how well the recommendations are applied.

⚠️ Important Notes

The ATE LC15 does not treat:

• Active water infiltration

• Flooding

• Existing mold

These issues must be addressed separately to ensure long-term results.