ATE LC30 Black – Wall Moisture Control System | Professional Electromagnetic Solution

🛠️ ATE LC30 Black – Wall Moisture Control System | Professional Electromagnetic Solution

💧 Wall Drying – The Effective Electromagnetic Solution Against Rising Damp

Wall moisture is a common issue, often linked to rising damp—a natural process where moisture from the ground moves upward through porous materials such as brick, stone, mortar, and plaster. This can contribute to mold, salt deposits, musty odors, heat loss, and reduced indoor comfort.

The ATE LC30 Black is a wall moisture control system designed to help reduce rising damp and damp walls over time, without chemical injection or invasive construction work. Using electromagnetic polarity inversion, it targets the source of moisture movement to support progressive results in masonry walls.

---

⚙️ How Does the ATE LC30 Work?

Every wall generates a natural electric potential difference, which encourages water to rise. The ATE LC30 emits low-frequency electromagnetic pulses that reverse this polarity:
Water molecules change direction and flow back down into the foundations due to gravity.

This process is continuous, silent, autonomous, and maintenance-free.

---

✅ Benefits of the ATE LC30 Black

• 📏 Coverage radius: 15 meters (30 meters in diameter)

• 🔇 Silent operation, no vibrations, no harmful emissions

• ⚡ Very low power consumption: only 0.75 W (~€15/year)

• 🎨 Sleek black design

• 🇫🇷 Made in France

• 🛡️ 10-year manufacturer warranty

• 📄 Certified to EU standards (EMF, RoHS, EMC, WEEE)

---

📘 User Manuals

• Manual – Download available

• EU Declaration of Conformity – Download available

---

📐 Technical Specifications

• Dimensions: 322 x 232 x 32 mm

• Power supply: 12 V

• Coverage area: 30 m diameter

• Consumption: 0.75 W

• Installation: Mount on a load-bearing wall (preferably humid)

---

🧪 Certifications

• Directive 2014/35/EU (Low Voltage)

• Directive 2014/30/EU (EMC)

• Directive 2011/65/EU (RoHS)

• Directive 2012/19/EU (WEEE)

• EMF tested by Emitech (certified safe radiation)

---

📈 Results & Efficiency

With proper installation and adherence to our recommendations, wall drying is generally observed within 18 to 24 months, depending on wall composition and building structure.

---

🧰 Installation Recommendations

• Install height: between 30 cm and 1 m from the floor, on a load-bearing wall, preferably damp

• Minimum distance: at least 1.50 m from any electronic device

• Mounting: like a picture frame – do not move once installed

• Power: must remain plugged in continuously (minimal consumption)

---

💡 Tips for Optimal Drying

1. Remove waterproof coatings 10–20 cm above the damp zone to allow the wall to “breathe”

2. Ensure good ventilation: use a mechanical system (VMC), window vents, and undercut doors (1.5–2 cm)

3. After drying: brush off salt deposits, then reapply breathable plaster with anti-salt additive

4. If lateral water infiltration is present: install drainage to reduce hydrostatic pressure

---

❗ Important

This device does not treat:

• Active water infiltration (e.g. leaks, floods)

• Existing mould on the surface

These issues must be addressed separately.