ATE LC30 Light Grey – Electromagnetic Polarity Inverter Against Wall Dampness

ATE LC30 Light Grey – Electromagnetic Anti‑Damp Device for Wall Drying

Electronic wall drying: a long‑lasting solution against rising damp

Wall moisture is frequently caused by rising damp, a natural physical process where water from the soil ascends through porous wall materials (brick, stone, etc.). This affects both older and newer homes, causing mold, aesthetic damage, heat loss, and discomfort.

The ATE LC30 is an electromagnetic polarity-inversion device, designed to sustainably dry damp walls without chemicals.

---

🔄 How ATE LC30 Works

Every wall naturally generates an electric potential difference with the ground, promoting capillary water rise. The ATE LC30 combats this by emitting low-frequency electromagnetic pulses that reverse the water polarity inside the wall.

Water molecules then reorient and descend by gravity toward the foundations, leading to progressive drying without damaging the structure.

---

✅ Advantages of ATE LC30

• Effective radius: 15 m (30 m diameter)

• Silent operation, no vibration, maintenance-free

• Low power consumption: 0.75 W (~€15/year)

• Easy installation: simple wall mounting

• Safe for humans, animals, and plants

• Certified: RoHS, EMC, EMF, WEEE

• Made in France – 10‑year manufacturer’s warranty

• Fast and free delivery

---

📘 ATE LC30 User Manuals

• Manual – Download manual

• Declaration of Conformity – Download document

---

📐 Technical Specifications

• Dimensions: 322 × 232 × 32 mm

• Power supply: 12 V

• Coverage radius: 15 m (30 m diameter)

• Power consumption: 0.75 W

• Certified by Emitech (non-harmful EMF)

---

ℹ️ Device Purpose

The ATE LC30 is intended to counter rising damp in walls by repelling moisture downwards, drying materials, and preserving the building’s structure and comfort.

Expected results appear within 18–24 months, subject to building layout and installation compliance.

---

🛠️ Installation Guidelines

• Placement: 30 cm to 1 m above the floor on a damp load-bearing wall (never on plasterboard or cladding)

• Minimum distance: 1.50 m from any electrical or electronic device

• Mounting: like a picture—do not move after installation

• Power: must remain plugged in at all times (very low consumption)

---

💡 Tips for Optimal Drying

• Remove film-forming coatings 10–20 cm above the degraded zone to let walls breathe

• Ensure good ventilation: VMC, window air vents, undercut doors (1.5 cm dry rooms, 2 cm in damp rooms)

• After drying, brush off hygroscopic salts and replaster using lime render with anti-salt additive

• Install a drainage system if there’s evidence of lateral hydrostatic infiltration

---

⚠️ Important Information

Results depend on wall thickness, material, coatings, and correct installation procedure. The ATE LC30 does not treat water infiltration, flooding, or active mold, which require dedicated solutions.